Production

The production of our products begins with the purchase of raw materials, our organisation purchases the best quality polyester yarn from foreign manufacturers with whom we have been cooperating for many years. Our company is confident in the quality of the raw materials we purchase, which, however, does not exempt them from incoming quality control. All raw materials are stored in proper conditions until the polyester tape production line is launched. The equipment used for the production of technical polyester belts ensures the uniformity of the woven belt and the absence of any defects.

In the manufacture of tie-down straps, we use only whole lengths of polyester webbing, we do not allow the use of spliced or sewn webbing. Any type of product is sewn using polyester fibre threads, the seams of which have a total strength not lower than the tape itself. The seams are sewn on a special automated machine to ensure the strength of the product and to prevent the seam from opening in the event of a break in even one stitch. Thanks to the full automation of the stitching process, a perfectly flat and high-quality seam is achieved.

The most abundant in the presence of accessories fixed to the belt is a tie-down belt for car carriers (for transporting wheeled vehicles). During the fastening of the fittings, the products are labelled with tags containing information about the product. The tags are manufactured and printed on special equipment, which allows to obtain a high-quality and wear-resistant tag.

The strap produced on our equipment has a weave that prevents the strap from unraveling or breaking in case of damage to any thread. Each stage of polyester strap production is closely monitored by our specialists, starting with the installation of packages with polyester yarn on the spinneret and ending with the output of the finished strap.

After the polyester strap is woven, it is sent to the finishing line, where it is shrunk and dyed. The strap is dyed with dispersed polyester dyes according to the technology specified in the Technical Specifications. Dyes and dyeing technology do not affect the yarns from which the strap is woven and do not have a negative impact on the environment. After dyeing, the polyester strap undergoes a relaxation stage in the workshops to completely eliminate internal stresses and is wound into rolls for storage and further sale or is used in the production of tie-down belts, towing belts, belts for car carriers.

Our company produces an elastic braided cord consisting of a stranded latex core and a braided polyester braid, which, thanks to the properties of polyester, provides maximum protection of the elastic element from destructive mechanical stress during operation.

The weaving is carried out in such a way as to ensure the strength of the outer covering and its integrity even in the event of a break in several threads. The process is automated, which ensures uniformity and excellent weaving quality.

When manufacturing a tow rope, cast hooks with an eyelet or welded half rings are attached to the polyester strap at both ends for further attachment of carabiners. By purchasing our products, you will be satisfied with the quality and service. And our regular customers can count on a flexible system of discounts.

JV «KRAFT», LLC pays special attention to quality control in production. We use advanced technologies and innovative materials to ensure the durability, reliability and safety of our products. Our company has a tensile testing machine for testing the strength of the strap, which helps us to understand in time whether the strap is of good quality and meets the requirements and standards. The machine itself is certified and tested for measurement accuracy. Our goal is not just to meet customer expectations, but to exceed them.